Semi-Automatic Uniform Case Sealers - These machines require an
operator to fold the case flaps and introduce the case into the machine,
then the machine seals both the top and the bottom of the case. When
a different case size run is required a simple, no tool adjustment is made
by the operator which takes very little time.
LD-7 Semi-Automatic Uniform Case Sealer:
Tapes boxes from 4.5" (114 mm) to 24" (610 mm) in
height and 4.5" (114 mm ) to 22" (559 mm) in width. (std)
Requires 115 - 220 volts, single phase, 60Hz
electrical (other voltage available)
80 feet per minute belt speed (production rate depends on box size and
operator dexterity).
Uniform Legend Semi-Automatic Case Sealer-
Tapes boxes from 2.5" (64 mm) to 24" (610 mm) in height and 4.5"
(114 mm ) to 22" (559 mm) in width. (std)
Converts to accommodate 2" or 3" wide tape requirements.
Requires 115 - 220 volts, single phase, 60Hz electrical (other
voltage available)
80 feet per minute belt speed (production rate depends on box size and
operator dexterity).
LD-3SB Semi-Automatic Uniform Case Sealer-
Tapes boxes from 4.5" (114 mm) to 24" (610 mm) in
height and 4" (102 mm ) to 20" (508 mm) in width. (std)
Requires 110 volts, single phase, 60Hz electrical
(other voltage available)
60 feet per minute belt speed (production rate
depends on box size and operator dexterity).
Side-Belts are ideal for light or unstable packages.
SP-304 Semi-Automatic Uniform Case Sealer-
Tapes boxes from 4.5" (114 mm) to 24" (610 mm) in
height and 4.5" (114 mm ) to 20" (508 mm) in width. (std)
Requires 110 volts, single phase, 60Hz electrical
(other voltage available)
60 feet per minute belt speed (production rate
depends on box size and operator dexterity).
Self-centering belts.
Key Benefits
Sturdy modular construction for long lasting performance and easy, safe
access to all parts.
Easy maintenance with sealed drive system and Case LockerST™ cartridges
that require no lubrication.
Simple and easy to use, plug in operation - Minimal operator training
required.
Knife guard system of the Case LockerST™ tape cartridge allows the blade
to be exposed only when the rollers are depressed.
Loveshaw warrants the above equipment for
1 Year on all components*
2 Years on Gear Reducer
3 Years on CaseLocker® ST Tape Cartridge
* Moving and wear parts
are not included. Other restrictions may apply.
